Flux Cored Welding Wire
| No | Product | Chemical Composition of Deposited Metal (%) | Hardness (HRC) |
Application | Special Notes | Impact | Abrasion | Corrosion Resistant | ||||||||||||||||||||||||
| C | Mn | Si | Cr | Mo | Ni | Ti | ||||||||||||||||||||||||||
| 1 | ACM-0 | 0.42 | 16 | 0.56 | 13 | AW19-21 WH45-55 | Crusher Rolls &Components | High Abrasion &Comperession | Good | Fair | ** | |||||||||||||||||||||
| 2 | HCC-0-3 | 5.6 | 1.1 | 0.5 | 30.1 | 60-62 | Hardface Plate | Severe Abrasion No Impact | Poor | Super | *** | |||||||||||||||||||||
| 3 | 58CW | 4.8 | 1.65 | 1.6 | 25 | 1.5 | 58-62 | Steel Mill Rolls, etc | Extame Severe Abrasion | Fair | Super | *** | ||||||||||||||||||||
| 4 | 62NK | 5.5 | 1.5 | 1.2 | 28 | 1.5 | Nb:3.00 W:1.20 |
62-66 | Hardface Plate | Extame Severe Abrasion | Poor | Ecellent | *** | |||||||||||||||||||
| 5 | 309-L | 0.03 | 1.6 | 0.58 | 21.6 | 11.9 | - | Mill & Roller | Heat resistance, Buffer Layer for Roll | Good | Fair | *** | ||||||||||||||||||||
| 6 | 62NB-O | 5.4 | 0.80 | 1.00 | 25 | 2 | Nb: 5.00 | 60-62 | Cement Mill Roll | Complex Alloy Extame Severe Abrasion | Fair | Excellent | ||||||||||||||||||||
| 7 | 258-TiCO | 2.2 | 1.3 | 1.7 | 6.8 | 1.6 | 6.4 | 54-56 | Crusher Hammers, Roll , Mixers Blade | Good | Excellent | |||||||||||||||||||||
| 8 | 58-MO (Mo-Alloy) | 4.70 | 1.00 | 0.80 | 25.00 | 4.50 | 55-60 | Hardfacing Crusher | Excellent | Good | ||||||||||||||||||||||